|
PROJECT:
|
OVER 1 MILLION SQUARE FEET OF ASBESTOS PANEL ROOFS ON A UNIVERSITY CAMPUS
|
SUBSTRATE:
|
ASBESTOS PANEL ROOF
|
DESCRIPTION:
|
Asbestos panels on multiple buildings faced expensive abatement or complete encapsulation. Tough Stuff urethane roof coatings are ideally suited for this project.
- The panels were power washed.
- After drying, the roof system was primed with Tough Stuff PR3500 – 2 part epoxy at a rate of 1.0 gallon per 100 square feet. The panels were then detailed with Tough Stuff UR1700 at approximately 20 - 24 mils.
Asbestos panels — before encapsulation
view full size photo
Asbestos panels — after encapsulation. Roof primed with Tough Stuff PR3500 primer and coated with Tough Stuff UR1700 gray urethane in two coats.
view full size photo
|
FOR ADDITIONAL INFORMATION, GO TO:
SEE OTHER PROJECT PROFILES:
See also:
Coatings International Project Profile Index
Coatings International Products Page
Coatings International Home Page
Coatings International Information Request Form
E-mail info@coatingsinternational.com
©Copyright 1998-2004 Coatings International, Inc. All rights reserved.
This page was last modified January 20, 2004 01:51PM
.
|
