D200 MATERIAL SAFETY DATA SHEET

VIEW / DOWNLOAD (Windows - "Right Click", Mac - "Option-Click") a printable PDF version of this document.

I - MATERIAL IDENTIFICATION AND INFORMATION
II - PHYSICAL/CHEMICAL CHARACTERISTICS
III - FIRE AND EXPLOSION DATA
IV - REACTIVITY HAZARD DATA
V - HEALTH HAZARD DATA
VI - CONTROL AND PROTECTIVE MEASURES
VII - PRECAUTIONS FOR SAFE HANDLING AND USE/LEAKS
RELATED DOCUMENTS

SECTION I - MATERIAL IDENTIFICATION AND INFORMATION

Components - Chemical Name & Common Names
(Hazardous Components 1% or greater: Carcinogens 0.1% or greater)

CHEMICAL NAME (COMMON NAME)	CAS #	%	OSHA PEL (PPM)	ACGIH TLV (PPM)	OTHER LIMITS RECOMMENDED
Does not contain hazardous ingredients		100

SECTION II - PHYSICAL/CHEMICAL CHARACTERISTICS

1) BOILING POINT	N/A
2) SPECIFIC GRAVITY	(Water = 1) .915 to .965
3) VAPOR PRESSURE	N/A
4) MELTING POINT	N/A
5) VAPOR DENSITY	N/A
6) EVAPORATION RATE	Not Applicable
7) SOLUBILITY IN WATER	Negligible
8) WATER REACTIVE	N/A
9) APPEARANCE & COLOR	Fluffy fibers or wet lap - no odor

SECTION III - FIRE AND EXPLOSION DATA

1) FLASH POINT & METHOD:

665°F (352°C)

2) AUTO-IGNITION TEMPERATURE:

365°F

3) FLAMMABILITY LIMITS IN AIR % BY VOLUME: N/A

LEL: N/A
UEL: N/A

4) EXTINGUISHER (MEDIA):

Dry chemical, carbon dioxide, foam & fog, water

5) SPECIAL FIRE FIGHTING PROCEDURES:

N/A

6) UNUSUAL FIRE AND EXPLOSION HAZARDS:

N/A

SECTION IV - REACTIVITY HAZARD DATA

1) STABILITY:

Stable

2) CONDITIONS TO AVOID:

N/A

3) INCOMPATIBILITY (Materials to Avoid):

Oxidizing acids, some chlorinated hydrocarbons

4) HAZARDOUS DECOMPOSITION PRODUCTS:

Thermal decomposition products above 650°F: carbon, carbon dioxide, carbon monoxide

5) HAZARDOUS POLYMERIZATION:

Will not occur

SECTION V - HEALTH HAZARD DATA

1) PRIMARY ROUTES OF ENTRY:

1. Inhalation-yes
   
2. Skin absorption-no
   
3. Ingestion-yes
   

2) CARCINOGEN LISTED IN:

1. NTP - no
   
2. IARC MONOGRAPH - no
   
3. OSHA - no

3) HEALTH HAZARDS

ACUTE: None
CHRONIC: None

4) SIGNS AND SYMPTOMS OF EXPOSURE:

N/A

5) MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:

N/A

6) EMERGENCY FIRST AID PROCEDURES:

Seek medical assistance for further treatment, observation and support if necessary

7) EYE CONTACT:

Irrigate eye with water for 5 minutes. Seek medical attention if irritation persists.

8) SKIN CONTACT:

Wash off with water

9) INHALATION:

Move subject to fresh air if effects occur, consult medical personnel

10) INGESTION:

No treatment required (ho harm)

SECTION VI - CONTROL AND PROTECTIVE MEASURES

1) RESPIRATORY PROTECTION (Specify type):

Dust mask if dust is present

2) PROTECTIVE GLOVES:

Not needed

3) EYE PROTECTION:

Goggles for dust

4) VENTILATION TO BE USED:

1. Local exhaust - If dusty
   
2. Mechanical (general) - N/A
   

5) OTHER (Specify): None

SECTION VII: PRECAUTIONS FOR SAFE HANDLING AND USE/LEAKS

1) STEPS TO BE TAKEN IF MATERIAL IS SPILLED OR RELEASED:

Sweep off and discard or wash with water.

2) WASTE DISPOSAL METHODS:

Recycle, incinerate in approved equipment landfill.

3) ENVIRONMENTAL IMPACT:

None

3) PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:

None

Revised April 2000


FOR ADDITIONAL INFORMATION, GO TO:

• D200 Product Data

VIEW A DIFFERENT TOUGH STUFF PRODUCT Choose.... Tough Stuff | Product Index ---ACRYLICS--- AC5000 AC5000 MSDS AC5500 Mastic AC5500 Mastic MSDS AC5600 AC5600 MSDS AC5900 AC5900 MSDS ---CLEANER--- CL404 CL404 MSDS ---ADDITIVES--- D200 D200 MSDS D210 D210 MSDS ---FABRIC--- FA200 Information ---PRIMERS--- PR3800 PR3800 MSDS ---URETHANES--- UR1600 UR1600 MSDS UR1650 Mastic UR1650 Mastic MSDS UR1900 UR1900 MSDS UR2550 UR2550 Part A MSDS UR2550 Part B MSDS UR2650 UR2650 Part A MSDS UR2650 Part B MSDS UR2750 UR2750 Part A MSDS UR2750 Part B MSDS

See also: