ciilogo.gif dot.gif

 

dot.gif
dot.gif
Search Our Site



home.gif
products.gif
profiles.gif
support.gif
index.gif
about.gif
info.gif
contact.gif

cirs_logo_s.gif

D200 PRODUCT DATA

Tough Stuff D200 is a microfine manufactured high tensile polyurethane fiber used as a general thickener for the Tough Stuff urethanes.

RECOMMENDED USES

PRODUCT CHARACTERISTICS

APPLICATION CONDITIONS
APPLICATION PROCEDURES
SAFETY PRECAUTIONS

ORDERING INFORMATION

RELATED DOCUMENTS LINKS

VIEW / DOWNLOAD A PDF VERSION OF THIS DOCUMENT

RECOMMENDED USESup.gif

  • Tough Stuff D200 can be used to thicken urethanes into sprayable or brushable mastics. Thicker materials allow for fabrication of cants or filling around irregular surfaces.

  • Tough Stuff D200 can be added to:

    AC5000
    SL6000
    UR1600
    UR1700
    UR1800
    UR2550
    UR2650
    UR2750

  • Excellent for flashing details, metal roof seams, inside and outside flashing details, round stacks, pipe legs, pitch pots, conduit pipes, expansion joints, etc.

PRODUCT CHARACTERISTICSup.gif

Melting Point: 248°F - 271°F (120°C - 133°C)
Specific Gravity: .0915 - .0965
Flash Point: 665°F (352°C)
pH: 1.5 - 7.0
Appearance: Fluffy fiber
Color: White
Shelf Life: Indefinite
Storage: Keep material dry
Cleanup: Sweep or vacuum

  • D200 allows you to greatly increase viscosity and filling ability of the coating at an economical price.

  • The product allows a higher viscosity and excellent vertical hold for a variety of applications.

  • The unique nature of D200’s fiber configuration allows excellent melding to the urethane without allowing slipping.

  • Adding D200 also creates a smooth easy to apply material.

  • Retains elastic properties; adds tensile strength

  • Inorganic; will not rot

  • Easily mixed in with hand tools at a ratio of 20% - 50%

  • Adding D200 to the urethane will shorten pot life. Do not add more than one hour in advance.

APPLICATION CONDITIONSup.gif

Temperature

Air & Surface: N/A

Relative Humidity:

Can be applied up to 95%

APPLICATION PROCEDURESup.gif

GENERAL INFORMATION

APPLY AT:

SPRAY GRADE

Add 20-30% D200 to urethane by volume

BRUSHABLE MASTIC

Add 30-40% D200 to urethane by volume

CANTS

Add 40-50% D200 to urethane by volume

SAFETY PRECAUTIONSup.gif

FIRST AID

  • EYES: Irrigate immediately for five minutes
  • SKIN: Wash off with flowing water
  • INHALATION: Remove to fresh air
  • INGESTION: No treatment required (nontoxic)

PRECAUTIONS

  • EYE PROTECTION: Goggles for dust
  • GLOVES: Not needed
  • RESPIRATORY: Dust mask if dust is present
  • SPECIAL CLOTHING/EQUIPMENT: None

ORDERING INFORMATIONup.gif

Packaging:

Container Size Weight Class
5 gallon pail 6 pounds 55

D.O.T. Shipping Information:

Nonhazardous, Nonflammable

HMIS:

Health 0, Flammability 1, Reactivity 0, Protection E

Published technical data and instructions are subject to change without notice. Please contact your Coatings International Roofing Systems representative for the most current information.

Revised April 2000

FOR ADDITIONAL INFORMATION, GO TO:up.gif

VIEW A DIFFERENT TOUGH STUFF PRODUCT

See also: