CL404 MATERIAL SAFETY DATA SHEET

Revised January 2000

Important: The information herein has been compiled from sources believed to be reliable and is accurate to the best of our knowledge. However, Coatings International, Inc. cannot give any guarantees regarding information from other sources and expressly does not make any warranties, nor assumes any liability, for it's use. If apprised of changes, updated MSDS sheets will be promptly issued. Users must make their own determination regarding the suitability of the product for their own purpose prior to use.

VIEW / DOWNLOAD (Windows - "Right Click", Mac - "Option-Click") a printable PDF version of this document.

I - MATERIAL IDENTIFICATION AND INFORMATION
II - PHYSICAL/CHEMICAL CHARACTERISTICS
III - FIRE AND EXPLOSION DATA
IV - REACTIVITY HAZARD DATA
V - HEALTH HAZARD DATA
VI - CONTROL AND PROTECTIVE MEASURES
VII - PRECAUTIONS FOR SAFE HANDLING AND USE/LEAKS
RELATED DOCUMENTS

SECTION I - MATERIAL IDENTIFICATION AND INFORMATION

Components - Chemical Name & Common Names
(Hazardous Components 1% or greater: Carcinogens 0.1% or greater)

CHEMICAL NAME (COMMON NAME)	CAS #	%	OSHA PEL (PPM)	ACGIH TLV (PPM)	OTHER LIMITS RECOMMENDED
2 Butoxyethanol	11176-2	4 - 8	25
Potassium Hydroxide	64742-94-5		1 - 3	2 mg/m3

SECTION II - PHYSICAL/CHEMICAL CHARACTERISTICS

1) BOILING POINT	217°F
2) SPECIFIC GRAVITY	(Water = 1)1.09
3) VAPOR PRESSURE	N/A
4) MELTING POINT	N/A
5) VAPOR DENSITY	(Air = 1) Heavier than air
6) EVAPORATION RATE	N/A
7) SOLUBILITY IN WATER	Miscible
8) WATER REACTIVE	N/A
9) APPEARANCE & ODOR	Clear liquid, mint odor

SECTION III - FIRE AND EXPLOSION DATA

1) FLASH POINT & METHOD:

None

2) AUTO-IGNITION TEMPERATURE:

N/A

3) FLAMMABILITY LIMITS IN AIR % BY VOLUME:

LEL N/A
UEL: N/A

4) EXTINGUISHER (MEDIA) -

Water Spray, Foam, Carbon Dioxide, or Dry Chemical

5) SPECIAL FIRE FIGHTING PROCEDURES:

Avoid direct contact with this product.

6) UNUSUAL FIRE AND EXPLOSION HAZARDS:

None

SECTION IV - REACTIVITY HAZARD DATA

1) STABILITY:

Stable

2) CONDITIONS TO AVOID:

None known

3) INCOMPATIBILITY (Materials to Avoid):

Acids, Aluminum, Tin & Zinc

4) HAZARDOUS DECOMPOSITION PRODUCTS:

N/A

5) HAZARDOUS POLYMERIZATION:

Will not occur

SECTION V - HEALTH HAZARD DATA

1) PRIMARY ROUTES OF ENTRY:

1. Inhalation - yes
   
2. Skin absorption - yes
   
3. Ingestion - yes
   

2) CARCINOGEN LISTED IN:

1. NTP - no
   
2. IARC MONOGRAPH - no
   
3. OSHA - no
   

3) HEALTH HAZARDS

1. ACUTE: See Signs and Symptoms listed below.
   
2. CHRONIC: N/A
   

4) SIGNS AND SYMPTOMS OF EXPOSURE:

May cause damage to upper respiratory if inhaled, can cause severe burns to skin, will cause severe burns.

5) MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:

None known

6) EMERGENCY FIRST AID PROCEDURES:

Seek medical assistance for further treatment, observation and support if necessary.

7) EYE CONTACT:

Will cause severe burns that result in damage to the eyes and even blindness. FLUSH IMMEDIATELY for at least 15 minutes then seek medical attention. Do not get in eyes. Eye contact can be avoided by wearing chemical safety goggles.

8) SKIN CONTACT:

This product is destructive to tissue contacted and produces burns. A latent period may exist between exposure and sense of irritation. Wash with plenty of water for at least 15 minutes. Remove contaminated clothing. Seek medical attention.

9) INHALATION:

Remove the victim from further exposure and restore breathing if required. Obtain medical attention

10) INGESTION:

If swallowed can cause severe burns and complete tissue perforation of mucous membrane of the mouth, throat, esophagus and stomach.

SECTION VI - CONTROL AND PROTECTIVE MEASURES

1) RESPIRATORY PROTECTION (Specify type):

OSHA approved respirator

2) PROTECTIVE GLOVES:

Rubber gloves

3) EYE PROTECTION:

Chemical safety goggles/eyewash station

4) VENTILATION TO BE USED:

1. Local exhaust: N/A
   
2. Mechanical (general): N/A
   
   

SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE/LEAKS

1) STEPS TO BE TAKEN IF MATERIAL IS SPILLED OR RELEASED:

Sweep up and dispose of in approved containers. Flush away residue with water.

2) WASTE DISPOSAL METHODS:

Dispose of in accordance with all federal, state, and local environmental regulations.

3) Environmental Impact:

N/A

3) PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:

N/A

VIEW A DIFFERENT TOUGH STUFF PRODUCT Choose.... Tough Stuff | Product Index ---ACRYLICS--- AC5000 AC5000 MSDS AC5500 Mastic AC5500 Mastic MSDS AC5600 AC5600 MSDS AC5900 AC5900 MSDS ---CLEANER--- CL404 CL404 MSDS ---ADDITIVES--- D200 D200 MSDS D210 D210 MSDS ---FABRIC--- FA200 Information ---PRIMERS--- PR3800 PR3800 MSDS ---URETHANES--- UR1600 UR1600 MSDS UR1650 Mastic UR1650 Mastic MSDS UR1900 UR1900 MSDS UR2550 UR2550 Part A MSDS UR2550 Part B MSDS UR2650 UR2650 Part A MSDS UR2650 Part B MSDS UR2750 UR2750 Part A MSDS UR2750 Part B MSDS

See also: