 |
ST7400 WOOD STAIN PRODUCT DATA
|
Tough Stuff Wood Stain provides a long lasting, maintenance free coating to color and protect wood without disturbing the natural texture.
PRODUCT CHARACTERISTICS
EXCELLENT COLOR RETENTION: Pure organic oxide pigments and premix acrylic copolymers give Tough Stuff stains excellent long term color retention.
DEEP PENETRATION: Fast and deep penetration is achieved through advanced micro pigment technology. The resulting stain is locked into the wood and can not peel or flake like paint or conventional coatings.
ECONOMICAL AND COST EFFECTIVE: Excellent coverage rates and simple application give the Tough Stuff system an edge over even flat latex on rough surfaces for both price and appearance. Initial costs can pay back three-fold on the long term maintenance-free performance of Tough Stuff stains.
STANDARD COLORS:
ST7440
CEDAR |
ST7450
DARK CEDAR |
ST7460
DOVE GRAY |
 |
 |
 |
Color samples are one (1) coat of stain on standard Wolmanized lumber typically used for wood decking.
*NOTE: Computer monitors and web browser software often display colors differently. Please use these colors as a guideline only.
Custom colors available.
| PROPERTY |
VALUE |
| Solids by Weight |
45% |
| Solids by Volume |
40.5% |
| Dry Time (75°F/24°C) |
2 - 4 hours |
| Cure Time (75°F/24°C) |
12 hours |
| Gloss |
Matte |
| Weight per Gallon |
8.09 pounds / 3.67 kg |
| Shelf Life |
Unlimited in unopened container |
| Storage |
Do not store material at temperatures less than 40°F (4°C) or above 120°F (49°C). |
APPLICATION PROCEDURES
GENERAL
- Do not open container until ready to use.
- Apply the sealer with spray, brush, or roller making sure that the product is worked into the wood.
- Pay special attention to end cuts and joints. On old severely weathered wood a second coat may be required to achieve color uniformity.
SURFACE PREPARATION
- All surfaces must be clean and fully dry prior to applying the sealer.
- New wood decks must be allowed to weather at least thirty (30) days before any application of the sealer or waterproofing material can be applied.
- Always contact the Coatings International, Inc. technical department for recommendations whenever the ability of the stain to penetrate the substrate is in question.
ESTIMATED COVERAGE RATE
| SUBSTRATE |
TOTAL SQ. FT./GAL. |
| New Wood |
200 |
| Old Weathered Wood |
100 |
PERFORMANCE TIPS
- WATERPROOFING: Superior penetrating clear silicone rubber sealant is recommended to thoroughly saturate the surface to form an excellent water shed over the stain. This greatly extends the life of both the coating and the substrate.
SAFETY PRECAUTIONS
- INSTALLERS must read, understand and follow all technical and informational literature for Tough Stuff Wood Stain prior to using this product.
- For chemical emergencies, spills, leaks, exposure, or accidents in the US: CALL CHEMTREC 24 HOURS A DAY / 365 DAYS A YEAR 1-800-424-9300.
ORDERING INFORMATION
| CONTAINER |
WEIGHT |
CLASS |
| 5 gallon (19 liter) pail |
46 pounds / 20.87 kg |
55 |
| 55 gallon (209 liter) drum |
465 pounds / 211 kg |
55 |
D.O.T. Shipping Information:
Coating Solution, NA1993,
Combustable Liquid, PG111
HMIS:
Health 2, Flammability 2, Reactivity 0, Protection - minimum requirements
Published technical data and instructions are subject to change without notice. Please contact your Coatings International representative for the most current information.
Revised May 2001
FOR ADDITIONAL INFORMATION, GO TO:
See also:
Coatings International Products Page
Coatings International Home Page
Coatings International Information Request Form
E-mail info@coatingsinternational.com
©Copyright 1998-2004 Coatings International, Inc. All rights reserved.
This page was last modified February 19, 2007 01:41PM
.
|
