ST7200 MASONRY & BRICK STAIN MATERIAL SAFETY DATA SHEET

Important: The information in this MSDS was obtained from sources which we believe are reliable. HOWEVER, THE INFORMATION IS PROVIDED WITHOUT ANY WARRANTY, EXPRESSED, OR IMPLIED, REGARDING ITS CORRECTNESS. The conditions or methods of handling, storage, use and disposal of the product are beyond our control, and may be beyond our knowledge. FOR THIS AND OTHER REASONS, WE DO NOT ASSUME RESPONSIBILITY AND EXPRESSLY DISCLAIM LIABILITY FOR LOSS, DAMAGE, OR EXPENSE ARISING OUT OF OR IN ANY WAY CONNECTED WITH THE HANDLING, STORAGE, USE, OR DISPOSAL OF THE PRODUCT. This MSDS was prepared and is to be used only for this product. If apprised of changes, updated MSDS sheets will be promptly issued. Users must make their own determination regarding the suitability of the product for their own purpose prior to use.

VIEW / DOWNLOAD (Windows - "Right Click", Mac - "Option-Click") a printable PDF version of this document.

I - MATERIAL IDENTIFICATION AND INFORMATION
II - PHYSICAL/CHEMICAL CHARACTERISTICS
III - FIRE AND EXPLOSION DATA
IV - REACTIVITY HAZARD DATA
V - HEALTH HAZARD DATA
VI - CONTROL AND PROTECTIVE MEASURES
VII - PRECAUTIONS FOR SAFE HANDLING AND USE/LEAKS
RELATED DOCUMENTS

SECTION I - MATERIAL IDENTIFICATION AND INFORMATION

Components - Chemical Name & Common Names
(Hazardous Components 1% or greater: Carcinogens 0.1% or greater)

CHEMICAL NAME (COMMON NAME) CAS # % OSHA PEL (PPM) ACGIH TLV (PPM) OTHER LIMITS

Titianium Dioxide 13463-67-7 20 10mg/m³ 10mg / m³

Hydrous Magnesium Silicate 14807-96-6 5 2mg/m³ 2mg / m³

Zinc Oxide 1314-13-2 5 5mg / m³

Diatomaceous Earth, Flux Calcined 58855-54-9 10mg / m³

SECTION II - PHYSICAL/CHEMICAL CHARACTERISTICS

1) BOILING POINT N/A

2) SPECIFIC GRAVITY 1.32 (Water = 1)

3) VAPOR PRESSURE N/A

4) MELTING POINT N/A

5) VAPOR DENSITY < 1 / (Air = 1)

6) EVAPORATION RATE < 1 / Slower than Ether

7) SOLUBILITY IN WATER Dilutable

8) WATER REACTIVE N/A

9) APPEARANCE & COLOR Viscous liquid, Mild odor

10) COATING VOC .095 Pounds/Gallon

SECTION III - FIRE AND EXPLOSION DATA

1) FLASH POINT & METHOD:

N/A

2) AUTO-IGNITION TEMPERATURE:

N/A

3) FLAMMABILITY LIMITS IN AIR % BY VOLUME: N/A

LEL: N/A
UEL: N/A

4) EXTINGUISHER (MEDIA)

Foam, Alcohol Foam, CO₂, Dry Chemical

5) SPECIAL FIRE FIGHTING PROCEDURES:

N/A

6) UNUSUAL FIRE AND EXPLOSION HAZARDS:

Product will not burn but may spatter if temperature exceeds the boiling point of water. Dried solids can burn.

SECTION IV - REACTIVITY HAZARD DATA

1) STABILITY:

Stable

2) CONDITIONS TO AVOID:

None Known

3) INCOMPATIBILITY (Materials to Avoid):

None Known

4) HAZARDOUS DECOMPOSITION PRODUCTS:

Burning of dried solids may give off oxides of carbon and nitrogen.

5) HAZARDOUS POLYMERIZATION:

Will not occur

SECTION V - HEALTH HAZARD DATA

1) PRIMARY ROUTES OF ENTRY:

Inhalation- N/A
Skin absorption- N/A
Ingestion- N/A

2) CARCINOGEN LISTED IN:

NTP - No
IARC MONOGRAPH - No
OSHA -No

3) HEALTH HAZARDS

ACUTE: None known

CHRONIC: None known

4) SIGNS AND SYMPTOMS OF EXPOSURE:

INHALATION: May contain products that will irritate mucous membrane and respiratory tract. Inhalation may produce symptoms of headache and nausea in poorly ventilated areas.

SKIN CONTACT: Prolonged contact may produce temporary reddening of skin.

EYE CONTACT: Direct contact may cause eye irratation.

INGESTION: No evidence of adverse effects.

5) MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:

None Known

6) EMERGENCY FIRST AID PROCEDURES:

See items 7 - 10 below.

7) EYE CONTACT:

Immediately flush eyes with water.

8) SKIN CONTACT:

Wash effected areas with soap and water.

9) INHALATION:

No emergency care anticipated.

10) INGESTION:

No harmful effects expected.

SECTION VI - CONTROL AND PROTECTIVE MEASURES

1) RESPIRATORY PROTECTION:

Use a NIOSH approved dust / mist respirator when spraying

2) PROTECTIVE GLOVES:

Vinyl or neoprene

3) EYE PROTECTION:

Safety glasses

4) VENTILATION TO BE USED:

Local exhaust: Recommended
Mechanical (General): N/A

5) OTHER (Specify):

N/A

SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE/LEAKS

1) STEPS TO BE TAKEN IF MATERIAL IS SPILLED OR RELEASED:

Restrict area to personel needed. Major spills should be collected for disposal. Small spills may be flushed to sewer if permitted by federal, state and local regulations.

2) WASTE DISPOSAL METHODS:

Incinerate or bury in a suitable landfill as permitted by government regulations.

3) ENVIRONMENTAL IMPACT:

N/A

4) PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:

Use with adequate ventilation. Avoid contact with skin and clothing. Avoid breathing spray mist.

FOR ADDITIONAL INFORMATION, GO TO: