 |
AC5900 MATERIAL SAFETY DATA SHEET
|
Important: The information in this MSDS was obtained from sources which we believe are reliable. HOWEVER, THE INFORMATION IS PROVIDED WITHOUT ANY WARRANTY, EXPRESSED, OR IMPLIED, REGARDING ITS CORRECTNESS. The conditions or methods of handling, storage, use and disposal of the product are beyond our control, and may be beyond our knowledge. FOR THIS AND OTHER REASONS, WE DO NOT ASSUME RESPONSIBILITY AND EXPRESSLY DISCLAIM LIABILITY FOR LOSS, DAMAGE, OR EXPENSE ARISING OUT OF OR IN ANY WAY CONNECTED WITH THE HANDLING, STORAGE, USE, OR DISPOSAL OF THE PRODUCT. This MSDS was prepared and is to be used only for this product. If apprised of changes, updated MSDS sheets will be promptly issued. Users must make their own determination regarding the suitability of the product for their own purpose prior to use.
 VIEW / DOWNLOAD (Windows - "Right Click", Mac - "Option-Click") a printable PDF version of this document.
I - MATERIAL IDENTIFICATION AND INFORMATION
II - PHYSICAL/CHEMICAL CHARACTERISTICS
III - FIRE AND EXPLOSION DATA
IV - REACTIVITY HAZARD DATA
V - HEALTH HAZARD DATA
VI - CONTROL AND PROTECTIVE MEASURES
VII - PRECAUTIONS FOR SAFE HANDLING AND USE/LEAKS
RELATED DOCUMENTS
SECTION I - MATERIAL IDENTIFICATION AND INFORMATION
Components - Chemical Name & Common Names
(Hazardous Components 1% or greater: Carcinogens 0.1% or greater)
CHEMICAL NAME
(COMMON NAME) |
CAS # |
% |
OSHA PEL
(PPM) |
ACGIH TLV
(PPM) |
OTHER LIMITS
RECOMMENDED |
| Acrylic Latex mixture |
 |
100 |
|
|
|
| Defoamer mixture |
|
0.1 |
|
|
|
| Surfactant mixture |
|
0.2 |
|
|
|
| Propylene Glycol |
57-55-6 |
0.2 |
|
L2.5
U12.5 |
|
| Texanol |
25265-77-4 |
0.4 |
|
|
|
| Tio2 |
13463-67-7 |
.6-.12 |
|
|
|
| Calcium Carbonate |
1317-65-3 |
20-30 |
|
|
|
| Wallastanite |
No CAS |
.8-10 |
|
|
|
| Fungicide |
|
.0002 |
|
|
|
SECTION II - PHYSICAL/CHEMICAL CHARACTERISTICS
| 1) BOILING POINT |
212°F / 100°C |
| 2) SPECIFIC GRAVITY (H2O = 1) |
1.18 |
| 3) VAPOR PRESSURE |
N/A |
| 4) MELTING POINT |
N/A |
| 5) VAPOR DENSITY (Air=1) |
Heavier than air |
| 6) EVAPORATION RATE |
slower |
| 7) SOLUBILITY IN WATER |
N/A |
| 8) WATER REACTIVE |
N/A |
| 9) APPEARANCE & COLOR |
White thick paste-acrylic odor |
SECTION III - FIRE AND EXPLOSION DATA
1) FLASH POINT & METHOD:
None
2) AUTO-IGNITION TEMPERATURE:
N/A
3) FLAMMABILITY LIMITS IN AIR % BY VOLUME:
LEL: N/A
UEL: N/A
4) EXTINGUISHER (MEDIA):
Water & foam - all types
5) SPECIAL FIRE FIGHTING PROCEDURES:
N/A
6) UNUSUAL FIRE AND EXPLOSION HAZARDS:
N/A
SECTION IV - REACTIVITY HAZARD DATA
1) STABILITY:
Stable
2) CONDITIONS TO AVOID:
Freezing
3) INCOMPATIBILITY (Materials to Avoid):
Strong acids
4) HAZARDOUS DECOMPOSITION PRODUCTS:
Fires may cause decomposition that may produce carbon monoxides, nitrogen oxides or carbon dioxide. These are highly toxic.
5) HAZARDOUS POLYMERIZATION:
Will not occur
SECTION V - HEALTH HAZARD DATA
1) PRIMARY ROUTES OF ENTRY:
- Inhalation- yes
- Skin absorption- yes
- Ingestion- yes
2) CARCINOGEN LISTED IN:
- NTP - No
- IARC MONOGRAPH - No
- OSHA - No
3) HEALTH HAZARDS
ACUTE: N/A
CHRONIC: N/A
4) SIGNS AND SYMPTOMS OF EXPOSURE:
Eyes: May cause burning
Ingestion: May cause irritation to throat & mouth and abdominal irritation
Skin: None known
Inhalation: None known
5) MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:
N/A
6) EMERGENCY FIRST AID PROCEDURES:
Seek medical assistance for further treatment, observation and support if necessary.
7) EYE CONTACT:
Flush with water for 15 minutes, obtain medical attention if irritaion persists.
8) SKIN CONTACT:
Remove contaminated clothing and wash skin with soap & water.
9) INHALATION:
Remove to fresh air.
10) INGESTION:
Give at least 2 glasses of water. Induce vomiting if patient is conscious.
SECTION VI - CONTROL AND PROTECTIVE MEASURES
1) RESPIRATORY PROTECTION (Specify type):
For spraying - use an approved nostril and mouth chemical cartridge mask in areas that are not well ventilated. In ventilated areas, use a formed cloth mask.
2) PROTECTIVE GLOVES:
Rubber
3) EYE PROTECTION:
Goggles
4) VENTILATION TO BE USED:
Local exhaust N/A
Mechanical (general): N/A
5) OTHER (Specify):
N/A
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE/LEAKS
1) STEPS TO BE TAKEN IF MATERIAL IS SPILLED OR RELEASED:
Small spills should be flushed with soapy water. Large spills should be diked and collected for disposal.
2) WASTE DISPOSAL METHODS:
The solids can be precipitated using alum and acids. The solids can be land filled. The liquids can be flushed to a sanitary sewer.
3) ENVIRONMENTAL IMPACT:
None
4) PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:
None.
Revised May 2001
FOR ADDITIONAL INFORMATION, GO TO:
See also:
|
